1
THREADED PORT CONNECTION
HOW TO USE
FIXING
FLUID
10 MAX
10 MAX
NO
YES
A
B
There are three possible:
2. At the rear,
with M6x70 screws
The supply includes:
2 screws M6x70
2 washers 6x12,5
(the M6 nuts are included in the group)
3. Panel
In this case the kit of “panel mounting
brackets” must be purchased
Code 9200702
1. At the front
,
with M5x75 screws.
The supply includes:
2 screws M5x75
2 washers 5x10
2 nuts M5
ONE has been designed to treat compressed air.
No other fluid can be used without express authorisation by Metal
Work.
It is preferable to use UNLUBRICATED air.
If there are devices
requiring lubrication, it is advisable to install the lubricator
downstream ONE as close as possible to the devices involved.
Connect the ports to the thread by rotating the fitting or ONE’s
rotary threaded port as most appropriate (A).
Do not subject the unit to transversal stresses or tilting torques
that may damage it (B).
Summary of Contents for ONE
Page 1: ...USE AND MAINTENANCE ...
