manualshive.com logo in svg

Metal Samples Company MS3500E, Manual, Page: 30 / 54

Share
Download
Metal Samples Company MS3500E Manual Download Page 30

26

G. System Shutdown Function

This function allows the user to suspend the logging process for any period of time without data
loss. The menu screen sequence to operate the function is as shown below:

To activate the “SYSTEM SHUTDOWN” function, the user should scroll through the main function
screens using KEY 1 until the “SYSTEM SHUTDOWN” function screen is reached. The user can now
use KEY 2 to access the submenu. The screen will now ask for confirmation. KEY 2 will activate
system shutdown; KEY 1 will return the user to the main function screens. If KEY 2 is used to activate
“SYSTEM SHUTDOWN”, data logging will cease but all existing data will be retained in memory.

When the user wishes to reactivate the logging process, either key can be used to access the screen,
and KEY 1 will then resume the logging process.

H.  Test Mode Function

The test mode function is used for factory trouble shooting of faulty instruments returned for repair and
in initial quality assessment of newly manufactured instruments. This function is not required for
normal instrument operation.

Summary of Contents for MS3500E























































Reviews:

No comments