PLOWMAXX
16
8.4 VISUAL MARKERS
A visual marker is installed on each wing.
(Fig.6)
The marker allows the operator of
the vehicle to establish a visual cue in width, height and space before the passage.
The markers serve ONLY as a guide and should in no way be taken to the exact value
of its position. The markers are bolted and use pre-perforated holes.
8.5 VISUAL MARKERS WITH LEVELING INDICATORS
On certain models an additional option may be available for the visual markers to
offer a self leveling indicator. By positionning both markers at an equal height the
plow is set level to the ground
(Fig.4)
.
8.6 CUTTING EDGES (WEAR)
The cutting edges are considered wear parts. On this equipment, friction and
abrasion will lead to wear of the cutting edges. Depending of the type surface, the
outdoor temperature, the speed and how the user operates the equipment, the
cutting edge’s may wear at a much faster rate than normal.
A trained operator will use the appropriate amount of pressure. Too much pressure
will lead to premature wear. The maximal wear point is indicated by a groove cut into
the cutting edges.
(Fig. 8)
Fig.7.1
(Fig.7.1-7.2)
Fig.6
Fig.7.2
