Ignition switch (1) Ignition key (2)
:
When the ignition switch is placed in
the (ON) position the engine can start
when the ignition key is turned to the right.
When the ignition switch is placed in the
(OFF) position the engine will not start, or
will turn off, if running.
Note: Always make sure the ignition
switch (1) is placed in the (OFF) position
after operation. Leaving the switch (ON)
will drain the battery.
Parking Brake Lever (5): Lever pulled to
back position will set the parking brake.
Always use parking brake when engine is
not running or while engine is running and
is in a stopped position for an extended
period of time.
Forward and Reverse lever (6): Lever
placed in forward position will allow the
kart to move forward. Lever pulled to
back position places kart in reverse.
Note: Never try to shift Go Kart in
Forward or reverse while the Go Kart is
moving. Before shifting, make sure kart is
stopped and engine is at low idle.
5
1
Brake Pedal (3): Depressing the brake
pedal will stop the Go Kart.
Note: Always check brakes before
operation
Gas Pedal (4): Depressing gas pedal will
increase engine RPMs causing Go Kart to
move.
3
DESCRIPTION AND PART FUNCTIONS
9
2
4
6
7
Speedometer (7): Shows speed of Go
Kart in miles per hour and logs miles
traveled on the Odometer.
