Metal Defender MD-6A, User Manual

Page: 6 / 19

6
Product Description
The MD-6A from Metal Defender utilizes a unique 6 zone detection system. This 6 zone
detection system can help identify what portion of the body has metal on it. This unit should
specifically be used for detecting and preventing metal and alloy materials from being hidden
on the human body. The MD-6A by Metal Defender has 6 individual zones that can all be
programmed based on the users desired settings. The sensitivity can be adjusted up or down;
The highest sensitivity could detect metal similar to the size of a paper clip. The MD-6A from
Metal Defender is a great security solution for most but not limited to: Schools, Recycling
plants, Airports, Night Clubs, and Venues.
Common Troubleshooting Tips & Tricks
1. Machine won ’ t power on
- Check and ensure the power is connected properly and securely
- Check whether the power switch is on.
- Check to make sure a fuse did not blow out.
2. Unit is not counting pass throughs
- Make sure the unit isn’t installed in strong sunlight as it uses infrared communication to
operate properly
- Make sure that the infrared sensors are lined up properly, clean, and void of any physical
defect
- Lastly call a technician to take troubleshooting steps further and decide whether or not the
sensors are malfunctioning
3. Unit is alarming without metal content
- Make sure the unit is still working properly by ensuring there is no metal on a test persons
body including jewelry, buttons, etc. If it still alarms in specific zone turn down the
coordinating zones respectively until it doesn’t alarm.