Metal Craft 0226-00, Installation Manual

Page: 4 / 4

156 Burton Street
●
Painesville , Ohio
●
USA
●
1.800.989.DOCKS (3625)
440.286.7135
●
Fax: 440.286.7134
●
info@metalcraftdocks.com
●
www.metalcraftdocks.com
Step #4 -
Step #5 -
Step #6 -
Install the
Swim Ladder Clamp
,
Swim Ladder Mounting Angle
and the
5/16” x 2” HHCS
as shown. Loosely tighten for now.
On the underside of the deck module,
loosely i nstall the self-clinching nut to the
5/16" x 2-1/2" bolt installed in step 3.
Repeat process for the second bolt with
the second nut.
Tighten both nuts .
Tighten all bolts attaching the swim
ladder clamp and mounting angle from
Step 4
above .
Installation is complete for end mount.
D. Installation - Other Docks or Surfaces.
Step #1 -
Use punched holes in the Swim Ladder Mounting Bar welded to the handles . Use lag
screws or bolts in wood and anchors in cement (hardware store item, not supplied).
Step #2 - Install the
Swim Ladder Clamps front vertical legs of the ladder. Use lag screws or
bolts in wood and anchors in cement (hardware store item, not supplied). See Step 4 above
for reference.