156 Burton Street
●
Painesville
, Ohio
●
USA
●
1.800.989.DOCKS (3625)
440.286.7135
●
Fax: 440.286.7134
●
●
www.metalcraftdocks.com
C. Installation - End Mount
Step #1 -
Insert the arms of the ladder into
the lower section
containing the
rungs and bolt together
with
included, separate hardware kit.
Open the Metal Craft hardware
kit and lay out the parts from the
installation kit
detailed on
previous page
.
Step #2 -
Place the ladder on the deck module so that
the handles of the ladder measure
approximately 17-1/4" apart
keeping in mind
to line up the holes in the mounting bar of the
ladder with openings between the deck slats
.
Step #3 -
Locate the 5/16-18" x 2-1/2" HHCS. Place
one cap screw in the pre-drilled hole located
closest to the rear of the ladder on the
mounting bar. Thread the HHCS through the
space between the deck slats.
Thread the
HHCS through the space between the deck
slats for each side of the
l
adder.
Repeat
this step for the opposite side.
