METAKOO XMX611 Owner'S Manual Download Page 2

A

1

20200221

On the purchase of your new Ride-On.
This ride-on car will provide your child with many miles of riding of enjoyment. To help assure 
you and your rider a safe ride we ask you to please read this manual carefully, and keep it for 
future reference.
Follow the recommendations in this manual, they are designed to improve the safety and 
operation of your ride-on car and its rider.

Suitable age: 

Charge time: 

Load capacity:  

Size of car:

 

Speed: 

About Your New Vehicle

3+ Years

8~12 hours

Under 30 kg

with trailer 1365 x 500 x 525 mm

without trailer 845 x 500 x 525 mm

3-8 km/h

Specification

 Non-rechargeable batteries are not to be recharged.

 If removable rechargeable batteries are used, the are only to be charged under adult supervision.

 Remove rechargeable batteries from the product before charging.

 Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard 

(carbon-zinc) or rechargeable (nickel-cadmium). 

 Insert batteries as indicated inside the battery compartment, anode to anode, cathode to cathode.

 Remove batteries during long periods of non-use. Always remove exhausted batteries from the 

product. Battery leakage and corrosion can damage this product. Dispose of batteries safely. 

 Never short circuit the battery terminals.

BATTERY INFORMATION

Battery
Charger
input
Motor

12V4.5AH X1

12V500mA

390-16000

12V7AH X1

12V1000mA

390-16000

Depend on local voltage

Summary of Contents for XMX611



















Reviews: