METAKOO XMX611 Owner'S Manual Download Page 18

J

Fuse

Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.

Disposal Of Battery

●  Your sealed lead-acid battery must be recycled or disposed of in an environ-

mentally sound manner.

●  Do not dispose of your lead-acid battery in a fire. The battery may explode or 

leak.

●  Do not dispose of a lead-acid battery in your regular, household trash. The 

incineration, land filling or mixing of sealed lead-acid batteries with household 
trash is prohibited by law.

The battery features a thermal fuse with a rest fuse that will automatically trip and cut all 
power to the vehicle if the motor, electric system or battery is overloaded. The fuse will 
reset and power will be restored after the unit is turned OFF for 20 seconds and then turned 
ON again. If the thermal fuse trips repeatedly during normal use, the vehicle may need 
repair. 

Contact your distributor please.

To avoid losing power, follow these guidelines:

● Do not overload the vehicle.

● Do not tow anything behind the vehicle.

● Do not drive up steep slopes.

● Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to  

overheat.

● Do not drive in very hot weather, components may overheat.

● Do not allow water or other liquids to come in contact with the battery or other electric 

components.

● Do not tamper with the electric system. Doing so may create a short, causing the fuse to 

trip.

Summary of Contents for XMX611



















Reviews: