D.
CYCLE TIME starts to count down 20 seconds and REST flashes
once per second (0.75 on/0.25 off). The buzzer also sounds
synchronously, and READY also flashes synchronously in the last 3
seconds.
E, C and D continue to repeat the cycle, each cycle count increases by
1 until CYCLE TIME starts to count down 20 seconds after the 08/08
WORK exercise and REST flashes once per second (0.75 on/0.25 off).
F. After 30 seconds without any signal input, the buzzer will sound for
1 second to enter the wake-up mode.
G. Press the START button once, within 30 seconds of entering the
pause mode, the buzzer will beep every 1 second for 0.5 seconds.
When entering the pause mode, all displays will remain on the screen
for 3 seconds and then flash once every four seconds (3 on/1 off) ,
After 5 minutes of continuous pause, the buzzer will sound for 2
seconds to enter the wake-up mode, press START to continue
running.
H. Press the STOP button or the buzzer will sound for 1 second after
the end, TIME displays the total time, DISTANCE displays the total
distance, and CALORIES displays the total calories for 30 seconds.
WATT, SPEED, and PACE exchange and display the average and
maximum values every five seconds.
G.
When there is a heartbeat input, the 85%, 65% heartbeat value
and the maximum value are exchanged and displayed every five
seconds, if there is no heartbeat input, it will not be displayed.
5.3 INTERVAL CUSTOM:
A. Press INTERVAL Key to select INTERVAL CUSTOM. After pressing
Enter Key, enter this mode. INTERVALCUSTOM, 00/XX flashes, and
the buzzer sounds for 1 second. You can press UP or DOWN to set
00/XX. The setting range is 1~99 , Can be set in cycles, press ENTER
to confirm, the buzzer will sound for 1 second and enter the next
option setting (Figure 6-7).
B. TIME keeps on, WORK and 0:01 flashes, you can press UP or DOWN
to set the working time, the setting range is 0:00~9:59, it can be set
cyclically, press ENTER to confirm, the buzzer will sound for 0.75
seconds and enter The next option is set.
C. TIME is continuously lit, REST and 0:01 flashing, and the working
time can be set by pressing UP or DOWN. The setting range is
0:00~9:59 and can be set cyclically. After confirming by pressing
ENTER, the buzzer will sound for 1 second. INTERVALCUSTOM
continues Light up.
