Metaflex MDA120, Installer Manual

Page: 38 / 55

Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00)
P
age 38 of 55
11.2 Priorities
De SDA-04 controller heeft verschillende ingang en menu instellingen waarmee de invloedd van signalen
uit de omgeving en het gedrag van de deurbewegingen bepaald kan worden. In situaties waarin deze
signalen tot conflicterend gedrag zou kunnen leiden, worden prioriteiten gebruikt om te bepalen wat de
actie van de deur zal zijn. Hiervoor zijn de volgende niveaus gedefinieerd:
Prio Status Omschrijving Input
1 Safety Critical safety, stop immediately Emergency stop
Hardware fault
Installation fault
Configuration fault
Menu is activated
2 Fire high prio Close in case of fire (low energy mode),
manual opening possible
Fire input
3 Emergency Deactivate lock, in case of emergency
input, override safety at opening Emergency input
Safety input
4 Fire low prio Open or close in case of fire, manual
opening possible Fire input
5 Controller Open or close by input signals override Lock input
6 Manual Open or close by manual door movement
(pull&go) Door movement detection
7 user Door movements controlled by input
signals Open inputs
13 Halfopen_
outside User This input is used to bring the door to the "Half
open" position or to allow the door to close in the
event of a 'Pulse open/Pulse close' system. When it
is 'one_way', the action is blocked.
15 Open_inside User This input is used to bring the door to the 100%
open position or to allow the door to close in the
event of a 'Pulse open/Pulse close' system. When it
is 'one_way', inside signals can open the door.
16 Halfopen _
inside User This input is used to bring the door to the "Half
open" position or to allow the door to close in the
event of a 'Pulse open/Pulse close' system. When it
is 'one_way', inside signals can open the door.
23 Lock_pos This is an input to which the feedback signal of a
lock can be connected.
25 Safety edge Emergency This is the input to which the safety list can be
connected. At the same time, this input can also be
used for sliding space security.
26 Edge_ctrl/ Emergency This input can be used for the self-monitoring of
safety systems or as an input for the sliding space
protection. When this signal is activated, the door
only moves at a ´slow speed´.
26 Sliding
space Security Emergency The input edge_control can also be used as an input
for the sliding space security.
29 Safety 1 Emergency This input is used for the signal of the 1st safety
device.
32 Safety 2 Emergency This input is used for the signal of the 2nd safety
device.