Hong Kong Metadex Electronic Technology Limited
Metadex Confidential
Page 9
7/21/2010
7.3.
LAN Setup
7.3.1.
Basic Setup
MAC Address
Show MAC address of AP to the LAN, this value can’t be set and changed.
IP Address
Please enter the LAN IP address of the AP. The factory default value for IP address is 192.168.7.1,
you can set up according to your actual needs of the value.
Mask
Please enter the LAN subnet mask of the AP, usually its 255.255.255.0 in the LAN. All the
computers must be the same as the subnet mask.
Gateway
Enter your gateway address
Here, if you change your LAN port IP address, you must use the new IP address to log AP
management interface, and the default gateway under the LAN of the AP for all computers must
also be set to the IP address, so you can properly connect to Internet. All the computers in the
LAN subnet mask subnet mask must be the same as here.
7.3.2.
LAN VLAN
Set the VLAN number (0~4096 4096=none) of the LAN1 and LAN2 in LAN VLAN
configuration.
7.4.
WLAN Setup
7.4.1.
Basic Setup
