Hong Kong Metadex Electronic Technology Limited
Metadex Confidential
Page 6
7/21/2010
LED from left to right mean: LAN Ethernet Status 1, LAN Ethernet Status 2, PoE / PSE
forwarding, WLAN Status; Power / Status, WAN Uplink / PoE. Provide “reset” button to resume
to the factory default state in the event of an exception.
Lights Status
Description
P1
：
LAN Ethernet Status 1
Light flash: Internet port network connection to normal
Light out: Internet port is not connected network, or anomaly
P2
：
LAN Ethernet Status 2
Light flash: Eth/PSE port network connection to normal
Light out: Eth/PSE port is not connected network, or anomaly
PSE
：
PoE/PSE forwarding
Light bright
：
Eth/PSE port access POE equipment
，
and power is normal.
Light out: Power is not normal, or access non-POE equipment
WLAN
：
WLAN Status
light flash: WIFI enabled
Light out: WIFI disabled
Power
：
Power/Status
Lights Periodic flash: AP power is normal.
Light out: AP power is anomaly
WAN
：
WAN Uplink/PoE
Light flash: the network that AP connect to switch is normal
Light out: the network that AP connect to switch is abnormal
6.2.
Installation Environment
Installation environment requirements:
1. AP placement, please try to stay away from heating devices.
2. Do not put AP in dirty or wet areas.
3. Temperature: 0
o
C
～
40
o
C
4. Humidity: 5% ~ 90% rh non-condensing
6.3.
Hardware Installation Steps
Please follow these steps to install the AP. Remember to keep your hands dry during installation.
The installation of this product is very easy, as shown in process:
