Metacon-Next B.V.
OHD-C EI(1) 60 / EI(2) 90 / EW 90 & OHD-C EI(1) 120
18-07-2022
User manual
art nr: 89022
Rev: 4
16
Step 4a - Use of drilling jig consoles & motor slide
Place the drilling jigs according to Metacon Installation Drawing. Check that it
is level, mark the hole pattern and remove the drilling jigs. To ensure it is
securely fastened, use at least 3 mounting holes per console (2 above and 1
below the horizontal beam). Then drill the holes, taking into account the
required distance and depth of the fasteners.
