Metabo PA 14.4-18 LED-USB, Operating Instructions Manual

Page: 10 / 84

10
A slightly acidic, flammable fluid may leak from
defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with
your skin, rinse immediately with plenty of water. If
battery fluid leaks out and comes into contact with
your eyes, wash them with clean water and seek medical
attention immediately!
Warning - general danger!
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Do not direct the light beam into the eyes of
people or animals.
In accordance with IEC/EN 62471 for
"Photobiological safety of lamps and lamp systems",
these lamps are in the Exempt Group.
Transport of li-ion battery packs:
The shipping of li-ion battery pack is subject to laws
related to the carriage of hazardous goods (UN 3480
and UN 3481). Inform yourself of the currently valid
specifications when shipping li-ion battery packs. If
necessary, consult your freight forwarder. Certified
packaging is available from Metabo.
Only send the battery pack if the housing is intact and
no fluid is leaking. Remove the battery pack from the
machine for sending. Prevent the contacts from
short-circuiting (e.g. by protecting them with adhesive
tape).
See page 1.
1 LED lights
2 Belt hook
3 On/Off switch for LED lamps
4 12V connector (only for HJA 14.4-18 (6.570...)
5 USB port
6 Operation display
7 On/off switch
8 Battery pack (*not in scope of delivery)
Insert a fully charged battery pack (8) (*not included
in the scope of delivery)
The Power Adapter can be worn on the belt hook (2)
of the user's belt.
6.1 LED lights
Using switch (3) switch on or off (press for at least
0,5 seconds).
Do not direct the light beam into the eyes of
people or animals.
4. Overview
5. Commissioning
6. Use