ENGLISH
en
21
• The vacuum cleaner is not switched on or off by
means of a power tool, even though switch is
turned o the left to “AUTO”. - check Cordless
Control transmitter (press button). Is the radio
connection ok? Subsequently mount the
transmitter directly on the power tool.
• Is the battery pack defective? See the chapter on
Repairs.
Dust in the container when fleece filter bag is
fitted:
• The position of the rotary slide is incorrect. See
chapter 6.1.
PE disposal bag is sucked to the filter
cassettes (22):
• The position of the rotary slide is incorrect. See
chapter 6.2.
Do not interfere with the device. Contact
an authorized workshop or Metabo's after-
sales service department (see chapter 13. on
Repairs).
f
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
See page 4.
A Fleece filter bag
5 pieces = 1 set
B PE disposal bag M
5 pieces = 1 set
C Filter cassette M, polyester, nano-coated
2 pieces = 1 set
D Filter cassette M, polyester
2 pieces = 1 set
E Motor protection filter (1 filter) You must order 2
items.
F Suction hose (conducts electricity)
G Suction tubes (2 pieces), plastic
H Suction tubes (2 pieces), chrome-plated
I Intermediate piece of handle
J Connecting sleeve
K Connecting sleeve
L Floor nozzle
M Floor nozzle set (with floor piece and wet
vacuuming piece)
N Battery packs
O Chargers
Repairs to devices must be carried out by qualified
electricians only!
Use only original Metabo spare parts.
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
For EU countries only: Never dispose of
appliances in your household waste!
According to European directive 2012/19/EU
on Waste Electrical and Electronic Equipment and
its implementation in national law, used devices
must be collected separately and delivered for
environmentally-friendly recycling.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
K
=dust class. As per EN 60335-2-69.
LxWxH =external dimensions
IP
=protection class
U
=mains voltage
F
=main frequency
A
=power consumption
N
=mains connection lead
P
1
=rated input power
p
U1
=max. vacuum (at the hose)
p
U2
=Max. vacuum (at blower)
V
l/s1
=Max. volume flow (at hose)
V
l/s2
=Max. volume flow (at blower)
D
max1
=Max. flow rate (at hose)
D
max2
=max. flow rate (at the blower)
V
=max. container volume
m
=weight (without mains cable)
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
direct current
Typical A-effective perceived sound levels
(IEC 60335-2-69):
L
pa
=sound-pressure level
L
WA
=acoustic power level
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity with EN
60704.
~
AC Power
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
12. Accessories
13. Repairs
14. Environmental Protection
15. Technical Data
