4. Storing
○
When not in use for an extended period, apply a thin
coat of the lubricant to the steel parts to avoid rust.
○
Do not store the Stapler in a cold weather
environment.
Keep the Stapler in a warm area.
○
When not in use, the Stapler should be stored in a
warm and dry place.
Keep out of reach of children.
5. WARNING
LABEL
Do not use the Stapler with missing or damaged
WARNING LABEL.
A new WARNING LABEL is available from a
metabo HPT authorized service center.
Warning label
6. Maintenance chart (See page 23)
7. Operator troubleshooting (See page 24)
8. Service parts list
CAUTION
●
Repair, modification and inspection of
metabo HPT Power Tools must be carried out by
an metabo HPT Authorized Service Center.
This Parts List will be helpful if presented with the
tool to the metabo HPT Authorized Service Center
when requesting repair or other maintenance. In
the operation and maintenance of power tools,
the safety regulations and standards prescribed
in each country must be observed.
MODIFICATIONS:
metabo HPT Power Tools are constantly being improved
and modi
fi
ed to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
SERVICE AND REPAIRS
WARNING
●
Only service personnel trained by
metabo HPT, distributor or employer
shall repair the Stapler.
●
Use only parts supplied or recommended by
metabo HPT for repair.
All quality Staplers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE:
Speci
fi
cations are subject to change without any
obligation on the part of metabo HPT.
Maintenance chart
ACTION
WHY
HOW
Drain air line
fi
lter daily.
Prevent accumulation of moisture
and dirt.
Open manual petcock.
Keep lubricator
fi
lled.
Keep the Stapler lubricated.
Fill with metabo HPT pneumatic tool
lubricant.
Clean
fi
lter element and blow air
through
fi
lter in direction opposite to
normal
fl
ow daily.
Prevent clogging of
fi
lter with dirt.
Follow manufacturer’s instructions.
Clean staples and caps magazine and
staples and caps feeding mechanism.
Prevent a jam.
Blow clean daily.
Keep push lever working properly.
Promote operator safety and e
ffi
cient
Stapler operation.
Blow clean daily.
Lubricate the Stapler after stapling.
Extend the Stapler life.
Supply 5 – 10 drops of lubricant into
the Stapler.
Drain air compressor daily.
Keep the Stapler operated properly.
Open petcock on air compressor
tank.
23
English
000Book̲N3808AP̲NA̲metabo.indb 23
000Book̲N3808AP̲NA̲metabo.indb 23
2018/02/05 18:14:12
2018/02/05 18:14:12
