6
English
4.
NEVER
insert any objects into the charger or
adapter’s air vents. Electric shock or damage to the
charger or adapter may result.
5.
NEVER
use outdoors. Keep the battery or AC/DC
adapter away from direct sunlight and use only where
there is low humidity and good ventilation.
6.
NEVER
charge when the temperature is below 14°F
(-10°C) or above 104°F (40°C). (UC18YSL3)
NEVER
use when the temperature is below 32°F
(0°C) or above 104°F (40°C). (ET36A)
7.
NEVER
connect two charger or adapter together.
8.
NEVER
insert foreign objects into the hole for the
battery or the charger or adapter.
9.
NEVER
use a booster transformer.
10.
NEVER
use DC power.
11.
NEVER
store the battery or charger or adapter in
places where the temperature may reach or exceed
104°F (40°C) such as inside metal box or car.
12.
NEVER
expose the battery or charger or adapter to
rain or wet conditions.
13.
ALWAYS
operate charger or adapter on standard
household electrical power (120 volts). Using the
charger or adapter on any other voltage may overheat
and damage the charger.
14.
ALWAYS
wait at least 15 minutes between charges to
avoid overheating the charger.
15.
ALWAYS
disconnect the power cord from its
receptacle when the charger or adapter is not in use.
[The information below applies only to ET36A]
16. Do not use the product if the tool or the AC/DC adapter
terminals (AC/DC adapter mount) are deformed.
Installing the AC/DC adapter could cause a short
circuit that could result in smoke emission or ignition.
17. Keep the tool’s terminals (AC/DC adapter mount) free
of swarf and dust.
○
Prior to use, make sure that swarf and dust have not
collected in the area of the terminals.
○
During use, try to avoid swarf or dust on the tool from
falling on the AC/DC adapter.
○
When suspending operation or after use, do not leave
the tool in an area where it may be exposed to falling
swarf or dust.
Doing so could cause a short circuit that could result
in smoke emission or ignition.
18. The product is intended for Use in Pollution Degree
2 or PD2 environments. Operate only in areas of
non-conductive pollution. A temporary conductivity
caused by condensation is normally expected.
19. This is a precision machine so do not drop or expose
to impact.
20. Do not use this product near a pacemaker or other
similar implanted device, which may be a
ff
ected by a
magnetic
fi
eld produced by this product.
21. The adapter, power supply box and the inside of the
DC cord generates a boosted high voltage of 380 V so
please be careful of the following.
○
Do not disassemble the product.
○
Do not drop or expose to impact.
In the event the product is damaged from strong
impact, do not use the product.
○
Do not use the product in areas exposed to rain,
snow, iron powder or wet condition.
○
Do not touch the product with wet hands.
○
Do not spill or pour liquid onto the product.
○
Do not pull the cord with excessive force.
○
Use the product in a well-ordered work environment.
CAUTION
1. When the mesh of the vent is plugged by objects such
as wood shavings, try to keep the objects out when
you clear the mesh.
(If not properly maintained, the temperature protective
feature could shut the product o
ff
)
2. When the temperature protective feature frequently
cuts the power o
ff
, do not overload the machine with
continued work, but let the machine rest for a little
before continuing operation.
3. The machine does get hot. However, this does not
indicate an abnormality.
Keep the electricity running and operate the internal
fan to cool the machine before carrying it elsewhere.
When carrying the product, make sure to use the cord
armor. The case may be hot so please be careful.
4. During use, do not pull the cord to move the Box.
Doing so may result in damage.
5. Do not use more that a single cord reel of 30 meters.
Doing so may result in damage.
6. During use, if the machine stops running after the
Box’s LED lamp blinks, con
fi
rm the power supply
environment.
7. Do not drag the cord when using or carrying the
machine.
Doing so may tear the cord insulation or break the
cord which could result in electric shock.
8. Do not stretch the cord out any more than required.
When using tools such as gardening clippers or
circular saws, always make sure of the power cord’s
position to avoid cutting the cord during operation.
9. To use the AC/DC adapter after it shuts down due to
high temperature, disconnect the box’s power plug,
wait for the LED lamp to go out and then reconnect
the box’s power plug.
If the machine cuts o
ff
even after su
ffi
ciently cooling it
o
ff
with the built-in fan, discontinue use as there may
be a problem with the machine.
10. Do not use this product near a radio. Doing so could
cause noise from the radio, making it di
ffi
cult to listen
to a broadcast.
00Book̲M3612DA̲NA.indb 6
00Book̲M3612DA̲NA.indb 6
2020/11/18 9:52:36
2020/11/18 9:52:36
