15
English
Stop screw
Washer (A)
Knob bolt (C)
Knob bolt (B)
Guide pin
Trimmer guide
Fig. 18
(4) As shown in Fig. 19, securely attach the bottom of
the base ass’y to processed surface of the materials.
Feed the trimmer with the guide pin alongside the
material.
Body feed direction
Trimmer guide
Fig. 19
<Straight guide>
○
It is handy when used for linear processing work such
as beveling, grooving and the like.
(1) Fit the straight guide with knob bolt (B) on the base
ass’y and
fi
x it.
(2) Adjust the length “C” from the bit to the surface of
straight guide by loosening the wing nut and moving
the straight guide as necessary. (Fig. 20)
Straight guide
Knob bolt (B)
Bolt
Wing nut
Loosen
Wing nut
Guide holder
Knob bolt (B)
Washer (A)
Tighten
Straight guide
C
Fig. 20
Lock lever
Base ass’y
Screw
Template guide
Fig. 15
When using the trimmer along the interior plane of
the template, the dimensions of the
fi
nished product
will be less than the dimensions of the template by
an amount equal to dimension “B”, the di
ff
erence
between the radius of the template guide and the
radius of the bit. The reverse is true when using the
trimmer along the exterior of the template. (Fig. 16)
Bit
Template guide
Template
Base ass’y
B
Fig. 16
Secure the template to the workpiece. Feed the
trimmer in the manner that the template guide moves
along the template as shown in Fig. 17.
Template
Fig. 17
<Trimmer guide>
The guide is handy when used in processing of
materials such as trimming and beveling of plywood.
(1) Fit the trimmer guide on the base ass’y with knob bolt
(B).
(2) Loosen knob bolt (B) to move the trimmer guide up
and down.
(3) Loosen knob bolt (C) and turn the stop screw to move
the guide pin. (Fig. 18)
After moving the guide pin, tighten knob bolt (C) to
secure it.
00Book̲M1808DA̲NA.indb 15
00Book̲M1808DA̲NA.indb 15
2020/12/25 10:37:37
2020/12/25 10:37:37
