9. Attaching
the
fl
uorine plate (sold separately)
Firmly
fi
x to the base with the bolts.
Fluorine plate
Fig. 27
NOTE
●
The maximum cutting depth will be 2.5 mm shallower.
●
Cutting anything other than wood will remove the
fl
uorine, making the base di
ffi
cult to slide.
●
The
fl
uorine coating of the base surface makes it
easier to slide, making the motor susceptible to
pressure. Do not press too hard on the unit.
WARNING
When using the guide, avoid inclined cutting that
will allow the cut material to be caught between
the saw blade and the guide. Doing so may result
in injury.
Saw blade
Guide
Lumber
Fig. 28
Saw blade
Guide
Lumber
Fig. 29
10. Attaching the dust collection adapter (sold separately)
When connecting with a dust extractor, attach the
dust collection adapter to the chip exhaust. When
connecting to the dust extractor, a hose with an
inside diameter of
φ
25 mm can be used for the dust
extractor.
Insert the catch of the dust collection adapter to the
front part of the chip exhaust, and fasten the dust
collection adapter with the M4 screw that is included
with the unit.
Dust collection adapter
Fig. 30
Fig. 31
11. Cutting procedures
CAUTION
●
Recheck that the saw blade is securely clamped.
●
Con
fi
rm that the lever for adjusting the slot
depth, the wing-nut for adjusting the angle of
inclination.
(1) Place the base on the material, then align the
premarked line and the saw blade with the notch at
the front of the base (Fig. 32).
Guide piece
45°
0°
Fig. 32 <Top View>
22
English
00Book̲C18DBAL̲NA̲metabo.indb 22
00Book̲C18DBAL̲NA̲metabo.indb 22
2021/03/30 17:21:00
2021/03/30 17:21:00
