29
English
Position the crown molding so that the lower surface (
Ⓐ
in Fig. 23) contacts the fence
as in Fig. 32.
Fig. 30
Turntable
Head
Bevel angle scale
Miter angle scale
Base
Sub fence (L)
Fig. 29
Base
Miter angle
scale
Turntable
Bevel angle scale
Head
Fig. 32
Fence
Ⓐ
Ⓑ
Table on base
Fig. 31
Fence
Ⓐ
Ⓑ
Table on base
Cutting method of crown molding without tilting the saw blade
(1) Crown molding stopper (L) and (R)
(Optional accessories) allow easier
cuts of crown molding without tilting
the saw blade. Install them in the
base both-sides side to be shown in
Fig. 33-a. After inserting Tighten the
6 mm knob bolts to secure the crown
molding stoppers.
Fig. 33-a
Crown molding vise ass’y
(Optional accessory)
6 mm knob bolt
(Optional
accessory)
6 mm wing bolt
(Optional
accessory)
Crown molding stopper (L)
(Optional accessory)
6 mm knob bolt
(Optional accessory)
Crown molding
stopper (R)
(Optional
accessory)
00Book̲C12FDHB̲NA̲NA.indb 29
00Book̲C12FDHB̲NA̲NA.indb 29
2021/01/29 10:32:23
2021/01/29 10:32:23
