E-BAM-9805 Manual Rev B.docx
Page 24
3.5.2 Ambient Temperature
This screen provides the options and
indications needed to default, verify, and
calibrate the ambient temperature sensor
as part of the flow audit and calibration. See
section 5.6 for detailed instructions.
Figure 3-14 The Ambient Temperature Screen
3.5.3 Ambient Pressure
This screen provides the options and
indications needed to default, verify, and
calibrate the ambient pressure sensor as
part of the flow audit and calibration. See
section 5.7 for detailed instructions.
Figure 3-15 The Ambient Pressure Screen
3.5.4 Flow Calibration
These four screens provide the options and
indications needed to default, verify, and
calibrate the various flow sensors as part of
the flow audit and calibration procedures.
See section 5.8 for detailed instructions.
Figure 3-16 Flow Calibration Screen (1 of 4)
3.5.5 Self-Test
This screen runs the self-test sequence. Press X to exit once it is complete
Figure 3-17 The Self Test Screen
