Electrical & Safety Conformity
The manufacturer certifies that this product operates in compliance with the following
standards and regulations:
•
FDA / CDRH This product is tested and complies with 21 CFR, Subchapter J, of
the health and Safety Act of 1968.
•
European Community (CE) Directive 89/336/EEC
EN 55011 Group 1, Class B (Emissions) and EN 55082-1 (Immunity)
•
IEC 60825-1 Ed.1.1 (1998-01)
•
EN 60825-1 W/A11 (1996)
•
US 21 CFR 1040.10
Warranty
Products manufactured by Met One Instruments, Inc. are warranted against defects in
materials and workmanship for a period of (1) year from the date of shipment from the
factory. Offered products not manufactured by Met One Instruments, Inc. will be
warranted to the extent and in the manner warranted by the manufacturer of that
product.
Any product found to be defective during the warranty period will, at the expense of Met
One Instruments, Inc. be replaced or repaired and return freight prepaid. In no case
shall the liability of Met One Instruments, Inc. exceed the purchase price of the product.
This warranty may not apply to products that have been subject to misuse, negligence,
accident, acts of nature or that have or modified other than by Met One Instruments,
Inc. Consumable items such as bearings are not covered under this warranty.
Other than the warranty set forth herein, there shall be no other warranties, weather
expressed, implied or statutory, including warranties of fitness or merchantability.
Page 4 of 18
GT-321 Operation Manual
GT-321-9800 Rev D.doc
AC Tool Supply
877-207-1244
www.aikencolon.com
