BT-620 Manual
Page 36
BT-620-9800 Rev B
7. Change the Baud Rate and Flow Control settings to match your BT-620. All other
settings should remain as shown above. Press the Submit New Settings button
to have these settings take effect. In some slower networks, characters may be
dropped. If this happens, set the Flow Control to “RTS/CTS” both here and on
the BT-620 Serial Screen (Section 4.4). When in doubt, set the Flow Control to
RTS/CTS when using Ethernet communications.
8.
Maintenance
Due to the nature of the instrument, there are no customer serviceable components in
the BT-620. The case of the BT-620 should never be removed or opened for any
reason.
Opening or removing the case of the BT-620 voids the warranty and may
result in exposure to laser radiation, which can cause eye injury.
8.1.
Service Schedule
Although there are no customer serviceable components in the BT-620, there are
service items which ensure the proper operation of the instrument. Table 1 shows the
service schedule for the BT-620.
