17
Preparation
Spraying
1. Place the device on its back. (Fig. 8)
2. Using the pump lever [11], pump slowly and regularly to maintain a continuous spraying
SUHVVXUHĺ7DEOH)LJ
0D[SUHVVXUHVKRXOGQRWH[FHHGEDU,IWKHPD[LPXPSUHVVXUHLVH[FHHGHGWKH
SUHVVXUHUHOLHIYDOYHZLOODFWXDWHDQGUHOHDVHWKHH[FHVVSUHVVXUHIURPWKHSUHVVXUH
YHVVHO
7RSUHYHQWGULSSLQJKROGWKHVSUD\ZDQGXSZKHQ¿UVWVSUD\LQJDQGDFWLYDWHWKH
VKXWRIIYDOYHXQWLOQRPRUHOLTXLGPL[HGZLWKDLUFRPHVRXWRIWKHQR]]OH
3. Ensure that the optimum spraying pressure is set on the pressure gauge [22] (Figs. 8
and 9).
1. Screw the cover [19] off the tank. (Fig. 6)
0HDVXULQJFXSV>@DUHLQWHJUDWHGLQWKHFRYHU>@DQGFDQEHXVHGWRSUHSDUHWKH
VSUD\LQJDJHQW)LOOWKHWDQNZLWKZDWHUSRXULQWKHVSUD\LQJDJHQWDQGWKHQ¿OO
XSZLWKZDWHU
3RXUWKHVSUD\OLTXLGWKURXJKWKH¿OOLQJVWUDLQHU>@LQWRWKHWDQN)LJ
,QWKHFDVHRIOLWHUGHYLFHVWKHPD[LPXP¿OOLQJTXDQWLW\LVUHDFKHGDVVRRQDV
WKHOLTXLGOHYHOFDQEHVHHQLQWKH¿OOLQJVWUDLQHU
3. Screw the cover [19] onto the tank. (Fig. 6)
Follow the instructions in the section entitled „Safety“.
The device must be in an upright position.
,I¿OOLQJWKHWDQNIURPDZDWHUOLQHHQVXUHWKDWWKHOLQHRUDKRVHGRHVQRWSURMHFW
into the tank.
Follow the instructions in the section entitled „Safety“.
Operate the device only while it is vertical or suspended upright and nearly
vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Follow the instructions of the spray product manufacturer!
Have damaged parts or parts that do not work properly repaired immediately by
our customer service department or by service partners authorized by us.
Table 2. Dependence: Spraying rate – spraying pressure
Nozzle
Pressure
1.1 (Basic equipment)
80015
8002
)ORZUDWHLQOPLQ
2.0 bar
0.56
0.48
0.65
6.0 bar
0.96
0.85
1.13
,IOLTXLGPL[HGZLWKDLUHPHUJHVIURPWKHQR]]OHWKHWDQNLVHPSW\
3XPSWKHGHYLFHFRPSOHWHO\HPSW\DIWHUHDFK¿IWK¿OOLQJDWWKHODWHVW
GB
IRL
AUS
USA
NZ
CDN
IND
