Mesto FOAMER 3270FE, Instructions For Use Manual

Page: 16 / 56

16
1. Pull up the red button on the piston pressure gauge [7] until all excess pressure is
released from the tank
(Fig. 3)
2. Press the piston rod with handle [9] down and turn into the lock.
Ź7KHSLVWRQURGZLWKKDQGOHLVORFNHG )LJ
3. Unscrew the pump [2] from the tank. (Fig. 6)
4. Add the liquid to the tank [1]. (Fig. 7)
5. Where appropriate, add cleaning agent.
&KHFNWKH¿OOLQJOHYHOZLWKWKHVFDOH>@RQWKHWDQN (Fig. 7)
7. Screw the pump [2] into the tank. (Fig. 8)
8. Press the piston rod with handle [9] down and turn out of the lock.
Ź7KHSLVWRQURGZLWKKDQGOHLVXQORFNHG
(Fig. 9)
9. Generate the desired pressure in the tank (Fig. 10).
+
7KHPD[LPXPSUHVVXUHVKRXOGQRWH[FHHGEDUUHGOLQHRQWKHSLVWRQSUHVVXUH
JDXJH)LJ,IWKHPD[LPXPSUHVVXUHLVH[FHHGHGWKHVDIHW\YDOYHZLOOHQJDJH
DQGUHOHDVHWKHH[FHVVSUHVVXUH
10. Press the piston rod with handle [9] down and turn into the lock. )LJ
Ź7KHSLVWRQURGZLWKKDQGOHLVORFNHG
EN ENGLISH
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Preparation
Observe the instructions in the section entitled „Safety“.
The device must be in an upright position.
,I¿OOLQJWKHWDQNIURPDZDWHUOLQHHQVXUHWKDWWKHOLQHRUDKRVHGRHVQRWSURMHFW
into the tank.
+
8VLQJWKHZKHHOORFN>@WKHOHYHURQWKHVKXWR௺YDOYH>@FDQEHORFNHGDQGXQOR-
cked. Unintentional spraying is prevented after locking (Fig. 12a)
Ź,IUHTXLUHGUHVHWWKHZKHHOORFN>@DQGDFWLYDWHWKHVKXWRႇYDOYH>@
(Fig. 12a and 12b)
Ź7KHVKXWRႇYDOYHPXVWRSHQDQGFORVH