Date
20.02.19
opto
USB-3.0
Page: 4
Manual
2.4 Installation Instructions
!
Risk of Fire or Damage
Do not open the devices. Opening the devices is only allowed with the necessary guidance and
previous authorization from . Non-observance can lead to fire or damage of the device.
Warranty will be void!
§
Possible Risk of Injury and Damage When not Observing this Manual.
The devices described in this manual, especially the pan/tilt unit, are very complex. This
manual must be read and respected compellingly before installation and initial operation.
Safety instructions must be respected compellingly.
Disregard can lead to considerable damage of the devices and serious risk of injury for the
user.
•
Use the devices only on skid-proof surfaces, respect the specific installation references for each device.
•
Electrical connections are only allowed to be done by authorized EMC trained specialist staff.
•
Consider electrical parameters and correct pinning assignment.
•
Incorrect electrical connections can damage the components of the devices.
•
Expert only installation of the connections, provide a strain relief if necessary.
•
Do not mechanically work on devices and cases!
•
Do not modify or short circuit plugs and do not shorten or extend included cables without the approval by the
manufacturer!
3 Regulations and References
3.1 Properties
Batteries are either integrated into the devices from or delivered separately as external battery packs.
The number of cells varies and depends on the respective needed required voltages.
The related charger has the following properties:
•
Power supply with power plug (Standard EU (Type C or F) unless ordered otherwise, optional US (type A), UK
(type G), AU (type I))
•
Integrated LEDs to display the charging level of the connected devices respectively the connected battery packs.
•
Short-circuit-proof, reverse polarity protected
•
Suitable for batteries with 4 … 10 cells and a capacity of 1.,0 … 10.,0 Ah
•
Charging process IUoU
Chargers with the charging process IUoU work basically identical to those using the IU (CCCV) charging process.
After reaching the end of charging voltage however, the device switches to trickle charging. This way, a self-
Distributed by: Reliant EMC LLC, 3311 Lewis Ave, Signal Hill CA 90755, 4089165750, www.reliantemc.com
