9
Manual IBRit
-
rf1
-
usb
3.
Programming of gauge radio modules with the programme
IBR_SimKey
The IBRit
-
rf1 gauge radio modules can be individually programmed by the programme IBR_SimKey.
All settings are stored by the gauge radio modules and are kept existing by a changing of battery.
For programming of gauge radio modules please click in the main window of IBR_SimKey ( Window for
measurement data display ) onto the
Setup
- Button. The window for selecting the connections is opened.
Please click in this window onto the
Service
- Button to reach the programming window. In the
programming window in the left upper window area you find the command list for programming the gauge
radio modules.
For Programming please select the particular command and after that the parameter. With the click on the
OK
- Button the command is set into waiting queue. Please press now on the gauge radio module which
should be programmed the data key for transmitting a measurement value. After the measurement value
transmission the PC radio module sends the command from the queue to the module. Two short peep
tones are confirming the successful programming.
Example : Programming of a new radio module address ( sender )
1. Click on Command :
Set module address
2. Parameter : Select address between
1
and
120
3. Set command into waiting queue : Click onto
OK
- Button
4. Press Data – Key for sending a measurement value on that gauge or gauge module which should be
programmed
5. Two short peep tones confirm the successful programming
