System Description
Scope of Delivery
8LE-D23_BA_E.docm
05.02.2019
13
/
88
3.1
Scope of Delivery
Quantity Component
1 M=LIGHT LED, 1000 W
Option
M=LIGHT Connection set USB (8LE-D22-2)
Option
M=LIGHT Installation set (8LE-D24-2)
3.2
Specification
M=LIGHT LED for continuous or pulsed operation.
The M=LIGHT LED is made up of 98 LEDs and can be used in continuous or pulsed operation. In
pulsed operation, the M=LIGHT LED is synchronized with the high-speed camera and twice as
much light output can be achieved as in continuous mode. The M=LIGHT LED can optionally be
operated manually or via the CAN-bus with the help of the software. In pulsed operation, it is
possible to eliminate backlight effects due to control of separate M=LIGHT LED groups. For the
elimination of backlight effects, only one camera synchronized with one M=LIGHT LED group is
switched on (Figure 1).
Figure 1: Synchronization in pulsed operation
Pos.: Description
1
Camera 1 switched on
2
M=LIGHT LED group 1 switched on
3
M=LIGHT LED group 2 switched off
4
Camera 2 switched off
5
Camera 1 switched off
6
M=LIGHT LED group 1 switched off
7
M=LIGHT LED group 2 switched on
8
Camera 2 switched on
