4.9 DAY/NIGHT
DAY/NIGHT function allows you to set how the camera switches
between color and black and white (B/W) mode. Options include
AUTO, COLOR and B/W. The default setting is AUTO.
AUTO:
In the AUTO submenu, you can adjust BURST value
and set:
Day->NIGHT: Set the light level at which the camera
switches to NIGHT mode. The higher the value, the darker
the lighting must be there before the camera switches.
NIGHT->DAY: Set the light level at which the camera
switches to DAY mode. The lower the value, the brighter
the lighting must be there before the camera switches.
COLOR:
Force the camera to stay in DAY (COLOR) mode at
all times. (Only for model without IR)
B/W:
Force the camera to stay in B/W (NIGHT) mode at all
times. The B/W submenu allows you to set BURST to be ON
or OFF. (Only for model without IR)
4.10 NR
NR allows you to configure the DNR (Digital Noise Reduction)
settings to reduce noise on the screen. In the NR submenu, you
can enable the NR MODE to the Y (BRIGHT) / C (COLOR), C LEVEL
or Y LEVEL mode. According to your NR mode, you can adjust Y
LEVEL or C LEVEL as required.
Note:
When the Y/C Level is higher, the noise in dark areas
become lessened. Also, resolution will become lower. When it is
lower, there are more noise in dark areas.
4.11 CAMERA ID
CAMERA ID allow you to specify camera ID. Options are OFF
(default) and ON. In the ON submenu, you can add a camera title
up to 26 characters with 2 lines and also select where the title
appears on the monitor screen.
4.12 SYNC
Set the sync mode as INT (internal, the default) or LL (line lock)
mode. The LL option only works with AC power.
4.13 LANGUAGE
OSD supports 8 multiple languages. Options include ENGLISH
(default), JAPANESE, GERMAN, FRENCH, RUSSIAN,
PORTUGUESE, SPANISH and SIMPLIFIED CHINESE.
4.14 CAMERA RESET
To restore factory defaults, select CAMERA RESET and then press
the joystick control.
4.15 SAVE ALL
SAVE ALL item allows you to save all settings and exit the OSD
menu.
5. Specifications
Type
Color Dome
Camera
Color Dome IR
Camera
Image Sensor
1/3” SONY Exview HAD CCD II
Signal System
NTSC
PAL
NTSC
PAL
Scanning System
2:1 Interlace
V: 59.94 Hz,
H: 5.734KHz
2:1 Interlace
V:50 Hz,
H:15.625KHz
2:1 Interlace
V: 59.94 Hz,
H:15.734KHz
2:1 Interlace
V:50 Hz ,
H:15.625 KHz
Effective pixels (HxV)
976(H) ×
494(V)
976(H) ×
582(V)
976(H) ×
494(V)
976(H) × 582
(V)
Sync system
Internal/Line Lock Selectable
Lens
f=3.7~12mm, F1.4
DC iris varifocal
f=3.3~12mm, F1.4
IR Corrected DC iris varifocal
TV lines
700TVL
700TVL
Iris Control
DC Iris Driver
View Angle
Horizontal:76.9°(wide) ~ 22.7°(tele),
Vertical:56.8°(wide) ~ 17.1°(tele)
Gamma Correction
0.45
Min. Illumination
F 1.4, 0.03 lux@50 IRE,
0.015 lux@30 IRE
0 Lux (IR LED ON)
IR LED
---
18 pcs
IR Wavelength
--
850nm
LED Life
--
More than 10,000 hours(50°C)
S/N Ratio
More than 50dB (AGC off)
Gain Control
On / Off (selectable)
White Balance
ATW/ Manual/ User/ Push/ Push lock
Electric shutter
1/60 sec
1/50 sec
1/60 sec
1/50 sec
Flickerless
On / Off (selectable)
BLC
Off / BLC / HLC (High Light Compensation) (selectable)
Day/Night Mode
Digital Day/Night
Mechanical (ICR) Day/Night
DNR
Yes
Motion Detection
Yes, 4 areas (max)
Privacy Mask
Yes, 8 zones (max)
High Light
Compensation
Yes
ATR*
On / Off (selectable)
OSD
Yes
Multi Language
English, Japanese, German, French, Russian, Portuguese,
Spanish, Simplified Chinese
Video Output
1Vpp composite output, 75 ohm
Power Requirement
AC 24V & DC 12V ± 10%
AC 24V & DC 12V ± 10%
Power Consumption
2.5W (max)
5W (max)
Operating Temp.
-10°C ~ 50°C
Operating Humidity
90% MAX
Storage Temp.
-20°C ~ 60°C
Storage Humidity
70% MAX
Dimension(WxLxH)
131x 132 x 112 mm (5.16" x 5.20" x 4.25")
Weight
750g approx.
Protection
IK10 Vandal-resistant, IP66
*ATR=Digital WDR
REA SEL
1/8
TOP
000
BOTTOM
000
LEFT
000
RIGHT
000
COLOR
1
TRANSP
0.00
MOSAIC
OFF
BURST
OFF
DELAY CNT
100
DAY->NIGHT
100
NIGHT->DAY
100
NR MODE
Y/C
Y LEVEL
000
C LEVEL
000
