4. OSD Settings
Use the OSD menu to set up the camera for optimum
performance.
OSD Main Menu
4.1 Lens
The LENS settings allow you to configure Lens and brightness.
Options are AUTO
(Auto Iris lens)
and MANUAL. The default
setting is AUTO.
In the AUTO submenu, you can set the MODE as OPEN, CLOSE or
AUTO. Then select SPEED to adjust the DC Iris Lens convergence
speed.
4.2 SHUTTER/AGC
You can set the SHUTTER/AGC as AUTO or MANUAL. The default
setting is AUTO.
When LENS is set to AUTO:
It is recommended to set
SHUTTER/AGC to AUTO mode. In the AUTO submenu, adjust
HIGH LUMINANCE MODE according to your application:
AUTO IRIS mode:
Use this for normal condition
application environments. The IRIS level will be controlled
by camera brightness.
SHUT+AUTO IRIS mode:
Use this for high light
application environments. The exposure will be controlled
by AES or the DC Iris. The iris level will be controlled by
camera brightness.
If SHUTTER/AGC is set to MANUAL, the submenu is shown as
below. The shutter speed is a variable from 1/50(1/60)sec to
1/10000sec and the AGC is selectable depending on your
environment condition.
4.3 WHITE BAL
WHITE BALANCE controls color on the screen. Options include
ATW (Auto White Balance), PUSH, PUSH LOCK, USER1, USER2,
ANTI CR (Anti Color Rolling Suppression) and MANUAL. The
default is ATW.
ATW:
Select ATW when the scene illumination varies
between indoor scenes and outdoor scene lighting.
MANUAL:
You can manually adjust the LEVEL from 15 to
69.
USER1/USER2:
You can adjust blue setting (B-GAIN) and
red setting (R-GAIN) value from 0 to 255.
PUSH:
When selected in the appropriate position, the whole
area will perform white balance.
PUSH LOCK:
When selected in the appropriate
position,
WHITE BALANCE will perform once.
4.4 BACKLIGHT
Set Backlight compensation function. It controls the light level to
overcome sever backlight conditions. Available options include
OFF, BLC or HLC (Highlight Compensation) mode. The default is
OFF.
If HLC is selected, HLC is activated automatically when the
camera detects high-luminance.
4.5 PICT ADJUST
PICTURE ADJUST allows you to adjust picture settings for optimal
image. In the PICT ADJUST submenu, you can adjust
BRIGHTNESS, CONTRAST, SHARPNESS, HUE and GAIN value. In
addition, you can set MIRROR to ON to reflect the image.
4.6 ATR*
Set ATR (Adaptive Tone-curve Reproduction) function. You can
select ON or OFF. The default is OFF. If selecting ON, you will
enter the ATR submenu, where you can set LUMINACE and
CONTRAST to optimize by image.
*Also known as Wide Dynamic Range. This function expands the
video dynamic range of the camera and improves visibility of
images even in high contrast environments.
4.7 MOTION DET
MOTION DET allows to detect moving objects on the screen. The
default is OFF. If selecting ON, you will enter the MOTION DET
submenu. You can set up to 4 motion areas to detect moving
objectives and adjust the motion detection sensitivity from 0 to
127.
4.8 PRIVACY
PRIVACY function mask up to 8 privacy areas on the screen from
video monitoring. The default setting is OFF. If selecting ON, you
will enter the PRIVACY submenu. You can confi
gure up to 8
privacy areas and set c
olor and transparency of the privacy zones.
In addition, you can enable MOISAIC function for the privacy
zone.
Note:
If you enable MOTION DET function, then PRIVACY
function will support 4 zones only.
PRIVACY
OFF
DAY/NIGHT
AUTO
NR
CAMERA ID
OFF
SYNC
INT
LANGUAGE
ENGLISH
CAMERA RESET
BACK
EXIT
SAVE ALL
TYPE
DC
MODE
OPEN
SPEED
046
HIGH LUMINANCE
MODE
AUTO IRIS
BRIGHTNESS
024
LOW LUMINANCE
MODE
AGC
BRIGHTNESS
x0.25
MODE
SHUT+AGC
SHUTTER
1/50(1/60)
AGC
6.0
SPEED
171
DELAY CNT
152
ATW FRAME
X0.50
ENVIRONMENT
INDOOR
MIRROR
OFF
BRIGHTNESS
000
CONTRAST
128
SHARPNESS
128
HUE
128
GAIN
128
LUMINANCE
LOW
CONTRAST
LOW
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PICT ADJUST
MOTION DET
OFF
ATR
OFF
NEXT
EXIT
SAVE ALL
