22
23
•
NORMAL:
Set the NORMAL funciton for normal traffic condition.
-
DCP:
for recovering the original color of exposure section of image. Select
ON or OFF to always enable or disable this function or AUTO to automatically
enable this function according to the exposure level of image.
-
ZONE:
select the zone which you want to recover the original color of
monitor section. Move the cursor to set up an item. Use LEFT/RIGHT/UP/
DOWN to move the default zone. Then press ENTER and again use LEFT/
RIGHT/UP/DOWN to increase the zone.
-
LEVEL:
Select LOW, MID or HIGH to decide the recovery level.
•
TRAFFIC L.:
Used for traffice light capture. Users can change its parameters
to create a new “CUSTOM T.L.” mode for different application.
-
DCP:
for recovering the original color of exposure section of image. Select
ON or OFF to always enable or disable this function or AUTO to automatically
enable this function according to the exposure level of image.
-
ZONE:
select the zone which you want to recover the original color of
monitor section. Move the cursor to set up an item. Use LEFT/RIGHT/UP/
DOWN to move the default zone. Then press ENTER and again use LEFT/
RIGHT/UP/DOWN to increase the zone.
-
LEVEL:
Select LOW, MID or HIGH to decide the recovery level.
•
LICENSE P.:
Used for licnese plate capture. Users can change its parameters
to create a new “CUSTOM L.P.” mode for different application.
CATCH ALL MENU
TRAFFIC NORMAL
EASY MODE <NORMAL>
LUMII *--------
SHUTTER <SET>
CHROMA *--------
L. SUPPR. OFF
GAMMA *---------
HLC *--------
PDSP OFF
BACK
CATCH ALL MENU
TRAFFIC NORMAL
EASY MODE <TRAFFIC L.>
LUMII *--------
SHUTTER <SET>
CHROMA *--------
L. SUPPR. OFF
GAMMA *---------
HLC *--------
PDSP OFF
BACK
Summary of Contents for SCR515PRO
Page 2: ......
