8
English
3.3.2 Connecting from a computer & Viewing Preparation
Connecting from a computer
1. Make sure the unit and your computer are in the same subnet.
2. Check whether if the networking available between the unit and the computer by executing ping the default IP address. To
do this, simply start a command prompt (Windows: from the Start Menu, select Program. Then select Accessories and choose
Command Prompt.), and type “Ping 192.168.1.30”. If the message “Reply from…” appears, it means the connection is available.
3. Start a browser e.g. Internet Explorer and enter IP address: 192.168.1.30. A login window should pop up. In the window, enter
the default user name: admin and password: 1234 to log in.
Further administration on the unit can be found in “User Manual".
Figure 3 - 2: Login Window
Viewing Preparation
Images of the unit can be viewed through various browsers. Before viewing, follow these steps to enable the display.
4. Enable Cookies as instructions below
●
In Internet Explorer, click Internet Options on the Tools menu.
●
On the Privacy tab, move the settings slider to Low or Accept All Cookies.
●
Click OK
.
5. When a proxy server is used, click Internet Options on the Tools menus of Internet Explorer, select Connect tab, click LAN
button, and set proxy server.
6. Change Security in Internet options as instructions below
●
On tool menu, click Internet Options.
●
Press the Security tab.
●
If the camera operates inside of the intranet, click the Intranet icon.
●
If the camera operates outside of the intranet, click the Internet icon.
●
Click Custom Level. This will open the Security Settings – Internet Zone screen.
Figure 3 - 3: Security Settings 1/4
