6
English
Step 3. Assembling the camera
Install the top cover upward to assemble the camera completely. The camera is thus stably fixed on the surface.
Figure 2 - 6: Assembling and Completing Camera Mounting
2.2.5 Adjusting the camera position
The unit has three axes for adjusting field of view on different applications. While screening live view on your monitor, adjust
the position by procedures below simultaneously for desired focusing position.
●
Pan Adjustment (A)
Rotate the lens base until satisfied with the field of view. Note that the bottom conduit hole of camera body is the point
where the camera lens shouldn’t be rotated over.
●
Horizontal Rotation (B)
Rotate 3D assembly in the lens, but do not turn assembly more than the limit as this may have the internal cables
twisted, disconnected, or broken.
●
Tilt Adjustment (C)
Adjust the camera lens tiltedly within the certain range (35° - 90°) to your desired field of view.
Figure 2 - 7: Adjusting the Camera Position
Caution
Limitation for three axes position:
Pan range : ±177°
Rotate range : ±177°
Tilt range : 35°~90°
A
B
C
