6. Reset Camera
There are two ways to reinstate the Factory Default settings for the camera.
6.1 Software Reset
Login as the administrator to “Live View”. Go into
Setup
. Then click
System
Update.
Choose
the desired option:
Restart Camera – The camera is restarted without changing any settings. Typically used
after updating firmware. After clicking, a pop up will appear asking you to confirm. Click
Yes.
Factory Default – Resets the camera to factory settings but keeps the Network settings.
After clicking, a pop up will appear asking you to confirm. Click Yes.
Hard factory default – Resets the camera to factory settings and will cause all parameters
(including the IP address) to be reset. After clicking, a pop up will appear asking you to
confirm. Click Yes.
6.2 Hardware Reset
If the Internet Explorer browser cannot be access for whatever reason or Software Reset does
not work then use Hardware Reset.
1. Loosen the two screws on top of the sunshield and remove the sunshield.
33
Summary of Contents for NCR875-HN5
Page 1: ...NETWORK CAMERA User s Manual ZS10 0000002G 875 A 5...
Page 36: ...35...
