3.3 Hardware/Software Requirement
Computer
-Windows Vista or XP as OS
-Internet Explorer Version 6.0 or later
-CPU: Intel Pentium 4.2 GHz or higher
-Memory: 512 MB or more
-VGA card--support Direct X 9.0 or above
Power Supply
The camera requires a DC12V/AC24V/PoE power supply. Make sure you use the correct power
supply before connecting to this network camera.
Use a RJ45 network connector to connect the camera to your computer or hub switch.
Hub Switch
A Hub Switch is required to monitor two or more cameras from the same computer.
3.4 Connecting the Camera to a Personal Computer
This section details how to access the camera from a computer.
3.4.1 Setting IP
This is a network-based camera and must be assigned an IP address first.
Enter a default IP address manually. The camera’s default IP address is 192.168.1.30 and
submask address is 255.255.255.0.
Obtain an IP address automatically from the DHCP server. You don’t need to change the
camera’s IP address if your network uses a DHCP server.
3.4.2 Connect the Camera to a Personal Computer
1. Connect the network cable to the camera and then turn on the camera’s power.
2. Set the personal computer’s IP address. The camera’s default IP address: 192.168.1.30 and
submask is 255.255.255.0.
3. Check that the camera and computer are connected by pinging the IP address you have set.
To do this, start a command prompt and type the IP address you set. If the message “Reply
from…” appears, it means the connection is done.
4. Start Internet Explorer and enter the set IP address (default is http://192.168.1.30). A login
window will appear. Enter the default user name: admin and password: 1234 to login .
5. Install ActiveX viewer. It is required to monitor both MPEG4 and Motion-JPEG video modes.
10
Summary of Contents for NCR875-HN5
Page 1: ...NETWORK CAMERA User s Manual ZS10 0000002G 875 A 5...
Page 36: ...35...
