4
English
2.3
Initial Configuration
Before connecting the camera to your network infrastructure, it’s suggested that you connect the camera to a computer first
to perform initial configurations.
1.
Configure the computer’s IP address to one other than the camera’s default IP address, such as:
IP Address:
192.168.1.100
Subnet Mask:
255.255.255.0
2.
Using an Ethernet cable, connect the camera to the computer.
The LAN port of the camera supports auto MDI/MDIX so there is no need to use a cross-over cable.
3.
On the PC, launch a web browser and enter the IP address of the camera in the URL field:
http://192.168.1.30
4.
When prompted for login, enter the default user name:
admin
and password:
1234
to login. Note that the user name
and password are case-sensitive.
5.
Configure the settings to meet your requirements. For more information, refer to the User Manual on MESSOA website.
2.4
Connecting to Your Network
Connecting to a LAN
If you have multiple cameras installed on your network, you can use the provided IP Finder utility to manage the cameras.
For more information, refer to the User Manual on MESSOA website..
Connecting to the Internet
To enable remote access to the cameras, you must configure your router/firewall to open port numbers. For more
information, refer to the User Manual on MESSOA website..
Router/Switch/Hub
xDSL/Cable
Modem
Router
