IR Bullet Series | Quick Guide
5
Table 1 - 1: Pictorial Index Definition
Index # Name
Description
1
I/O Connector
To individually connect Audio / Alarm Input / Output devices
2
Power Connector
Connects to the external power source of AC 24V only
3
RJ-45 Ethernet
Connector/ PoE
To connect the RJ-45 port with a CAT.5 cable for data
transmission and PoE (Power Over Ethernet) function.
A301RV
Green LED
With solid green, the light indicates a live connection
is established.
Amber LED
With flashing amber, the light indicates data is being
transmitted / received between camera and Internet.
A101RZ / A301RZ / A501RZ
Green LED
With solid bright green, the light signifies
connection bandwidth is 100Mbit/s.
With solid dark green, the light indicates
connection bandwidth is 10Mbit/s.
Amber LED
With solid amber, the light stands for that the
power of camera is being turned on.
4
Mounting Bracket
For mounting the unit onto different surface, the mounting
bracket is designed with 3 axes for flexible adjustment.
5
Sun Shield Hood
To minimize the effects from rain and sunlight on image quality.
6
External Focal Length &
Focus Controls
To adjust the zoom & focus controls (A301RV Exclusive)
7
Internal PIN Cap
Use a slotted screwdriver or a coin to open the cap and the
internal PIN including
“RESET”, “DEFAULT”, “VIDEO” and “Micro
SD Card Slot
” will be shown. More details are described below.
(Micro SD Card Slot is for A101RZ/A301RZ/A501RZ Exclusive.)
Table 1 - 2: I/O Connector Definitions
Purple (Signal)
Au/I: Audio in
Green (GND)
Yellow (Signal)
Au/O: Audio out
Orange (GND)
Blue (Signal)
AO: Alarm out
Brown (COM)
Red (Signal)
AI: Alarm in
Black (GND)
Table 1 - 3: Internal PIN Definitions
DEFAULT
Restore the unit to the factory defaults by
pressing the button for 5 seconds
RESET
Press to reboot the unit
VIDEO
To connect the supplied monitor out cable for
video output signal
Micro SD
Card Slot
Insert micro SDHC/SDXC card into the slot for file
storage (A101RZ/A301RZ/A501RZ Exclusive)
Note
Power supply terminal/adaptor for IO connectors and field wiring should comply with the Class
2 Circuit standard for ensuring safe from electrical fires and providing acceptable protection
against electrical shock.
