IR Bullet Series | Quick Guide
10
2.2.4 Adjusting the Camera Position
Pan Adjustment (A)
Loosening the cross screw by a cross screwdriver on the retaining ring (A position) can allow you to pan
the unit horizontally to your desired field of coverage.
Tilt Adjustment (B)
With cross screwdriver, loosen the cross screw on single side of the mounting bracket (B position) so that
you can tilt the unit vertically to a desired angle.
Horizontal Adjustment (C)
By loosening the cross screw of the C position as the figure below, you can rotate the unit within ±350° for
an ideal image coverage.
Figure 2 - 6: Adjusting the Camera Position
Caution
Limitation for three axes position:
Pan range : ±350°
Tilt range : 0°
～
90°
Rotate range : ±350°
Note
After adjustments, make sure to tighten the each screw for preventing unit from removing.
2.2.5 Adjusting Zoom & Focus / PIN Interface
(A301RV Series Exclusive)
Adjust the Near/Far and Tele/Wide controls via a screwdriver. Near/Far stands for focus control while
Tele/Wide indicates zoom distance tuning. Please carefully make use of screwdriver while adjusting
controls to prevent the unit from damage.
