9
•
Only use new alkaline or rechargeable batteries in the device.
•
Using spent batteries may damage the device and void the warranty
•
Before using the device for the first time or installing new batteries, wait about 10
minutes for the device to reach its operating temperature.
•
Do not dispose of used batteries in a fire.
10.
TAKING THE MEASUREMENT
1.
Open the clip.
Rys.5
2.
Place your finger on the rubber pads of the clip (make sure it is in the correct position), then
pinch your finger. (Rys.6)
Rys.6
CAUTION:
Nails and light emitting diode should be on the same side.
3. Press the switch button on the front panel once.
4. Do not swing your finger and stay calm. Do not make any movements during the
measurement.
5. Get information directly from the screen.
6. The On button (see Rys. 2) has three functions:
a) When the device is turned off - pressing the button can open it.
b) When the device is turned on - a short press of the button can change the direction of the
screen.
c) When the device is turned on - a long press of the button can brighten the screen.
11.
CLEANING AND DISINFECTION
• Turn off the device before cleaning.
• Cle
an the surface of the device before use. First wipe the device with medical alcohol and
then allow it to air dry or clean with a dry, clean cloth.
