background image

MeshNetworks

 

You assume responsibility for the selection of the appropriate applications program and associated reference 
materials.  MeshNetworks makes no warranty or representation that the Software will meet your requirements or work 
in combination with any hardware or applications software products provided by third parties, that the operation of the 
Software will be uninterrupted or error free, or that all defects in the Software will be corrected.  

WARRANTY SERVICE 

You must contact the Source of the Product within the applicable warranty period to obtain warranty service 
authorization.  Dated proof of purchase may be required.  A Return Material Authorization (RMA) number will be 
issued.  This number must be marked on the outside of the package.  The Product must be packaged appropriately 
for safe shipment and sent prepaid.  It is recommended that returned Products be insured or sent by a method that 
provides for tracking of the package.  Responsibility for loss or damage does not transfer to the intended recipient 
until the returned item is received by such party.  We will make commercially reasonable efforts to ship the repaired 
or replaced item to You, at our expense, not later than ten (10) business days after receipt of the defective Product.  
We will retain risk of loss or damage until the Product is delivered to You. 
We will not be responsible for any software, firmware, information, or Memory data belonging to You contained in, 
stored on, or integrated with any Products returned to the Source for repair, whether under warranty or not. 

WARRANTIES EXCLUSIVE, WARRANTY DISCLAIMER 

TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE 
AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER 
IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, 
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, 
CORRESPONDENCE WITH DESCRIPTION, INFORMATIONAL CONTENT, ACCURACY, SYSTEM 
INTEGRATION, NON-INFRINGEMENT AND QUIET ENJOYMENT, ALL OF WHICH ARE EXPRESSLY 
DISCLAIMED. WE DO NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE PRODUCT WILL MEET 
YOUR REQUIREMENTS, THAT THE PRODUCT WILL BE COMPATIBLE WITH ANY OTHER SOFTWARE, 
HARDWARE OR OPERATING SYSTEM, THAT THE OPERATION OF THE PRODUCT WILL BE 
UNINTERRUPTED OR ERROR-FREE.  WE NEITHER ASSUME NOR AUTHORIZE ANY OTHER PERSON TO 
ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE 
OR USE OF THIS PRODUCT. 
WE WILL NOT BE LIABLE UNDER THIS WARRANTY IF TESTING AND EXAMINATION DISCLOSE THAT THE 
ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY MISUSE, 
NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR OR 
MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY 
ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS. 

LIMITATION OF LIABILITY 

TO THE FULL EXTENT ALLOWED BY LAW, MESHNETWORKS EXCLUDES FOR ITSELF, ITS RESELLERS AND 
SUPPLIERS AND THEIR RESPECTIVE DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS, ANY LIABILITY, 
WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, 
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE 
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING 
OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, 
FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR OR REPLACEMENT. AT OUR OPTION THIS 
DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN 
WILL FAIL OF ITS ESSENTIAL PURPOSE. 
Some jurisdictions do not allow the exclusion or limitation of implied warranties or the limitation of incidental or 
consequential damages for certain products supplied to consumers, or the limitation of liability for death or personal 
injury, so the above limitations and exclusions may be limited in their application to You.  When the implied warranties 
are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty.  
This warranty gives You specific legal rights which may vary depending on local law. 

EXPORT COMPLIANCE

   

You agree and certify that the Product will be utilized only in the United States of America or in compliance with 
22CFR125.4(b)(9). 

GOVERNING LAW

 

This License Agreement & Limited Warranty will be governed by the laws of the state of Florida, U.S.A., and by the 
laws of the United States, excluding their conflicts of laws principles.  Both the Uniform Computer Information 
Transactions Act and the United Nations Convention on Contracts for the International Sale of Goods are hereby 
excluded in their entirety from application to this License Agreement & Limited Warranty. 

28

 

Summary of Contents for MEA PWR6300






































Reviews: