SAFETY INSTRUCTIONS
Safety instructions To reduce the risk of electric shock, fire and personal injury, this product must be
used in accordance with the following instructions.
1.
Only to be used by adults.
2.
This equipment should not directly massage the skin surface to avoid damage to the skin. The
massage part should be covered by clean, dry clothes or a clean, dry towel. It should be gently
pressed and moved. Massage time on the same part should not exceed 60 seconds.
3.
High speed and pressure should only be used on soft tissue parts of the body, if there is no pain
or discomfort. High speed and high pressure must not be used on the head or any bones of the
body.
4.
Frequent high-speed high-pressure use exerts pressure on the same body part. If abrasions,
painfulness or incapacity occur, please stop using immediately.
5.
Fingers, hair or any part of the body should be kept away from the telescopic rod of the device.
6.
Do not immerse the device in water. Do not allow water to enter the device
7.
Do not misuse the device. Dispose of the device correctly after the end of its useful life.
8.
Please check the equipment carefully before each use.
9.
Do not make any modifications to the equipment.
10.
Do not run or charge the device unattended.
11.
This device may not be disposed of with the normal household waste at the end of its life, but
must be taken to a special collection point for the reuse of electrical and electronic devices.
The materials used in the device can be recycled. By recycling used household appliances you
make an important contribution to the protection of our environment. Ask your local
government for the collection points.
12.
The device is only intended for massaging the human body. For damage caused by the use of
the device for other purposes, incorrect operation of repairs carried out by an amateur, no
liability will be accepted.
A. Mode switch
B. Charging jack
C. Indicator light
D. Power button
E. Massage head
F. Control panel
1. When using the product for the first time, take care that the battery is fully charged. It will about 5
hours.
2. Connect the power supply to the product as shown in the figure. At this time, the blue light flashes,
indicating that the battery is charging.
3. The blue indicator light stops flashing, which means that the charging can be stopped as soon as the
battery is fully charged.
4. This product is equipped with a standard charging power line and the charging voltage is 5V. Note:
universal USB charging power supply for smart phones).
