Page 4
Change User Codes
(continued)
5. Input: New User Code - # (lock will beep twice)
6. Re-Input: New User Code - # (light stays green for three (3)
seconds)
•
Example:
- 3 - 3 - 3 - # - User 2 Code - # - 2 - # - New User
Code - # - New User Code - #.
(This will change User 2’s Code).
•
Unsuccessful Code Change: five beeps, repeat steps 1 - 6.
DELETE USER CODES
1. Input:
(the lock will beep twice)
2. Input: 6 - 6 - 6 - # (the lock will beep twice)
3. Input: Current Master Code - # (the lock will beep twice)
4. Input: (
User
#
) - # (the lock will beep twice)
(
User #
: Specify which user you would like to delete: 1, 2, 3, 4 or 5)
5. Re-Input: (
User #
) - # (light stays green for three (3) seconds)
•
Example:
- 6 - 6 - 6 - # - Master Code - # - 5 - # - 5 - #.
(This will delete User 5).
•
Unsuccessful Code Change: five beeps, repeat steps 1 - 5.
SETTING SINGLE USER AND DUAL USER MODE
Single User Mode (Only one code needed to open safe)
1. Input:
(lock will beep twice)
2. Input: 1 - 5 - 8 - # (lock will beep twice)
3. Input: Current Master Code - # (lock will beep twice)
4. Input: 1 - # (light stays green for three (3) seconds)
•
Example:
- 1 - 5 - 8 - # - Master Code - # - 1 - #.
•
Unsuccessful Code Change: five beeps, repeat steps 1 - 4.
Dual User Mode (Two separate codes needed to open safe)
1. Input:
(the lock will beep twice)
2. Input: 1 - 5 - 8 - # (the lock will beep twice)
3. Input: Current Master Code - # (the lock will beep twice)
4. Input: 2 - # (light stays green for three (3) seconds)
