MSC SERIES MSL-50-
P
ELECTRONIC LOCK INSTRUCTIONS
|
PG.6
USING
THE OVERRIDE KEY
1
With the keypad face removed, locate the
override key slot inside the keypad collar, on the
right
.
See Figure
E
2
Using your key, with the larger/longer notches
facing
UP
, place the key into the slot.
You may need to angle the key slightly in order
for it to slide in properly.
See Figure
D
3
Make sure the key slides completely into the
slot, the pin fitting into the end of the key.
See Figure
E
4
Once key is snug,
turn
clockwise
[left] to the
8
o’clock position
.Your safe will be unlocked.
See Figure
F
REINSTALL
THE KEYPAD FACE
CAUTION : Be EXTREMELY careful with the wiring.
Do NOT pinch wires in between the keypad face & the
keypad collar.
1
With your fingers, carefully grip the keypad face,
holding it so the face is out & the numbers are right side-up.
2
Re-attach to the keypad collar by inserting
bottom first
, so the notch connects,
then carefully press/push into keypad collar casing.
3
Once the keypad face is snug in place, screw the keypad face back to the keypad
collar & replace the “MESA” bubble sticker.