Mesa 4I60 Manual Download Page 13

REFERENCE INFORMATION

WARRANTY

Mesa Electronics warrants the products it manufactures to be free effects in material and

workmanship under normal use and service for the period of 2 years from date of purchase. This
warranty shall not apply to products which have been subject to misuse, neglect, accident, or
abnormal conditions of operation.

In the event of failure of a product covered by this warranty, Mesa Electronics, will repair any

product returned to Mesa Electronics within 2 years of original purchase, provided the warrantor’s
examination discloses to its satisfaction that the product was defective. The warrantor may at its
option, replace the product in lieu of repair.

With regard to any product returned within 2 years of purchase, said repairs or replacement will be

made without charge. If the failure has been caused by misuse, neglect, accident, or abnormal
conditions of operation, repairs will be billed at a nominal cost.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED. INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY
PARTICULAR PURPOSE OR USE. MESA ELECTRONICS SHALL NOT BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN
CONTRACT, TORT, OR OTHERWISE.

If any failure occurs, the following steps should be taken:

1. Notify Mesa Electronics, giving full details of the difficulty. On receipt of this information,

service data, or shipping instructions will be forwarded to you.

2. On receipt of the shipping instructions, forward the product, in its original protective

packaging, transportation prepaid to Mesa Electronics. Repairs will be made at Mesa Electronics and
the product returned transportation prepaid.

Page 13

4I60 USER’S MANUAL

Summary of Contents for 4I60















Reviews: