INSTALLATION
GENERAL
When the 4I60 has been properly configured for its application, it can be inserted into a PC/104-
PLUS stack. The standoffs should then be tightened to secure the 4I60 in its place. When the 4I60 is
secured in the stack the I/O connectors can be plugged in from the side.
PC/104-PLUS
Again, the 4I60 is a PC/104-PLUS, PCI only card. This means that even though the PC/104 ISA
connector are present, the ISA signals are not used at all on the 4I60. The 4I60 will only work on
PC/104-PLUS CPUs!
POWER
The 4I60 gets all of its power from 5V. +12V power will be required if an external
transceiver is used on the AUI connector. This does not apply to the MESA MAU 10Base2 interface
which gets its power from a DC-DC converter on the 4I60 card. The 4I60 can be used with 5V and
3.3V PCI bus CPU cards. This voltage selection is automatic.
Page 11
4I60 USER’S MANUAL
