Safety Precautions
© 2011 Meru Networks, Inc.
Installing AP110
1
Chapter 5
Installing AP110
AP110 is supported by System Director versions 5.2 and greater. This chapter describes how to install
and configure an AP110. It contains the following sections:
z
Safety Precautions
z
Package Contents
z
Installing the AP110
z
Where to Go From Here
Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
The AP110 is only intended for installation in Environment A as defined in IEEE 802.3af. All directly
interconnected equipment (e.g., equipment sharing an electrical source) must be contained within the
same building, including the interconnected equipment's associated LAN connection.
This document briefly describes the package contents and installation procedure for the Meru AP110. Note
that the AP must be configured by IT personnel prior to deployment to communicate properly with the corpo-
rate network.
Package Contents
z
AP110
z
Power adapter (12V)
z
Quick Install (this document)
z
Ethernet Cable