19
Article no. 7641 94
Fig. A:
➊
Interface, 10-pin
➋
Programming key, manual
➌
Red LED, programming control
➍
Labelling field
➎
Bus supply terminal, max. 4 pairs of
wires
➏
Screw terminal, 2-pin, for 230 V power
line (L, switched)
For application module ARGUS 180 flush-
mount (OCTOCOLOR 6215 .. or System
Design 6214 .. or System M 6243 ..)
Easy switching actuator for ARGUS
180 flush-mount/230/10
Anleitung_764194.book Seite 19 Dienstag, 15. Oktober 2002 11:21 11
20
The Easy switching actuator for ARGUS
180 flush-mount/230/10 can only be used
in conjunction with the EIB Easy base unit
(Article no. 7900 29) or another external
EIB Easy setting device.
In addition to the 230 V power line, the
Easy switching actuator for ARGUS 180
flush-mount/230/10 requires a bus line. In-
formation on laying the bus line can be
found in the "base unit" operating instruc-
tions and in the ZVEI/ZVEH "Building man-
agement system, Basic principles"
handbook.
The relevant norms, guidelines, rules and
regulations of each country apply. Any
work on the installation bus must only be
carried out by qualified electricians. The
device should be protected against mois-
ture, dirt and damage during transporta-
tion, storage and operation. Do not operate
the device beyond the specified technical
data.
Important advice
Anleitung_764194.book Seite 20 Dienstag, 15. Oktober 2002 11:21 11
21
The software that lets the switching actua-
tor and the sensor communicate with each
other is divided into the functional areas
"actuator component" and "sensor com-
ponent". Both functional areas can be op-
erated together, but also completely
independently from each other. This guar-
antees maximum flexibility for the installa-
tion and the applications. This means there
are several possibilities for operating the
switching actuator (see also Assembly pro-
posal):
1. The ARGUS 180 flush-mount applica-
tion module is attached to the switch-
ing actuator and controls it.
2. As a stand-alone device. In this case,
the switching actuator is controlled via
a push-button located elsewhere. The
actuator is covered with a blinding cov-
er (Art. no. 6622 .., 6620 .. or 6621 ..).
The functional areas "actuator compo-
nent" and "sensor component" are de-
scribed in more detail below.
Functions
Anleitung_764194.book Seite 21 Dienstag, 15. Oktober 2002 11:21 11
