Reformer Owner’s Manual
22
Removing the Carriage
Important:
Removal of the carriage is essential prior to changing springs, rollers and ropes.
Please note
: Two people are required to remove and reinstall the carriage.
1. VERTICAL FRAME:
Remove all springs from vertical frame,
including roll-down bar [62] and safety chain [57]. Loosen all four
hex bolts [72] at the base of receptacles [71]. Secure push-thru bar
[64] in place by hand while removing vertical frame.
NOTE:
Requires two people.
3.
Remove shoulder rests [17] (if applicable).
4.
Detach all springs from gearbar [8]. Carefully slide carriage [15]
out of aluminum rails [14] keeping carriage level until completely
free of rails. Turn carriage over, ensuring rollers are secure and do
not come in contact with the floor.
NOTE:
Requires two people.
2.
To remove carriage [15], remove pulley posts [27] and place
them on floor, on either side of aluminum rails [14].
5
. Place carriage [15] face down on a blanket or soft surface.
MAINTENANCE & REPLACEMENT PARTS
Required Tool
Universal Assembly Tool
(supplied)
