MERMAID MARINE I-3, Installation & Operation Manual

Page: 13 / 13

Airflow to front grill is
obstructed
Remove item(s) blocking intake
Temperature not set cold enough Turn dial to colder setting. Refer back
to “
Adjusting The Temperature
Control. ”
2) The unit frosts
up Unit is a manual defrost product Refer back to “ Defrosting”
3) Water is
leaking out the
back of the unit
Water supply connection is
leaking Inspect all water connections and
tighten fittings.
4) Ice cubes are
sticking together Door gasket not properly sealed
Or infrequent use of cubes Adjust door gasket/latch or break apart
cubes by shaking the bucket. DO NOT
use sharp objects.
5) Noise during
operation Tubing lines are touching or
rubbing Inspect plumbing connections under
machine to ensure they are not touching
any other components.
6) No ice Bin arm is locked in the upright
position Manually lower bin arm
7) Not enough
ice Control setting too cold or ice
cube size too large Adjust temperature control. Refer to
“
Adjusting The Temperature
Control ” or Refer to “ Adjusting Ice
Cube Size. ”
8) Water leaks
into ice bucket Water level set too high Set cube size smaller. Refer to
“
Adjusting Ice Cube Size. ”
S hould the above information not be sufficient, please contact CMI at 904-260-9756 or you
may contact Mermaid for direct factory support during normal business hours of 8:00AM to
5:00PM EST Monday t h rough Friday at 800-330-3553 .
We hope you enjoy your Mermaid I-3 or I-3i Product and we thank you for your
business!